ICED Enamels® Medium
Susan Lenart Kazmer
Now in smaller 1oz Bottles, 29ml
Use this ICED Enamels® Medium to create beautiful effects on Metals to look as if they’ve been kiln fired enameled. Just brush this medium onto a Bezel, wire or lightly sanded metal; then sprinkle with our ICED Enamels® , fuse with a heat tool, then coat with ICE Resin® . Voila! the look of kiln-fired enameling without all the fuss!
- Lightly Sand your metal Bezel, Blank or Silhouette with sandpaper.
- Apply thin coat of ICED Enamels® Medium to surface.
- Sprinkle Iced Enamels® Powder onto surface.
- Gently shake-off excess.
- Melt Iced Enamels® Powders with craft heat gun, warming the metal from the underside at first, as much as possible. (A Tipod may be used).
- Build up additional layers of ICED Enamels® as you like.
- Let completely cool.
- To seal, mix ICE Resin® per to manufacturer directions and apply a thin coat with disposable paint brush.
- Let dry 6 to 12 hours.
Watch Video! Susan - Iced Enamels
Base Metal Beads & Findings (1372)
